Welcome: SHENZHEN YAONENG TECHNOLOGY CO.,LTD
Language: Chinese ∷  English
TEL:139-2653-4463

Silicone potting sealant

  •  5130 transparent electronic potting sealant
 5130 transparent electronic potting sealant

5130 transparent electronic potting sealant

  • Product Description: Transparent encapsulation silica gel
  • Product features: low viscosity, full transparency, fast dry surface
  • Application: sealing, insulation, filling and waterproof for electronic and electrical products
  • Featured services: provide samples, technical advice
  • Product description: Used for sealing LED display screen, waterproof power supply, microcomputer control board and high-power electronic components. Lighting products, LED soft light strip, hard light strip transparent s
  • INQUIRY

I. [Product Features]

1, two-component, low viscosity, fully transparent elastic environmental protection type electronic potting adhesive, sealant

2, with high temperature resistance, high pressure, solvent resistance, aging resistance, good weather resistance, low shrinkage and other characteristics.

3, after curing for the elastomer, high transparency, waterproof, moistureproof, impact resistance, vibration.

4, high and low temperature resistance, good chemical resistance;Room temperature curing, convenient and efficient

Two, [scope of application]

Yaoneng 5130 fully transparent electronic sealing adhesive is suitable for the following product range:

1. Used for sealing LED display screen, waterproof power supply, microcomputer control board and high-power electronic components.

2, lighting products of the potting, LED soft light strip, hard light strip products transparent potting and waterproof, good adhesion.

IV. [Usage]
1. Before mixing, component A needs to be fully stirred, component B should be fully shaken in the current state, and then used.
2, according to the need to use the dosage, press (100:10) with the use.When mixing, if the proportion needs to be changed, a simple test should be carried out. Under normal circumstances, the more B component (crosslinking agent), the faster the curing time will be, but at the same time, the operation time will also be shortened.
3. If bubbles are produced when mixing, the mixed rubber can be vacuumized first, and then reperfusion.
4. This product is non-dangerous goods and shall be transported as non-dangerous goods.Should be stored in a cool and dry place to prevent sun and rain.The B component crosslinker is hygroscopic and susceptible to deterioration, and should be stored airtight.
5. [Precautions]
2, the production process should strengthen ventilation and personal protection work, prohibit open fire, and away from the source of fire and heat source.
3, handling light, packaging cover should be promptly covered, used tools, equipment, etc. should be cleaned in time, in order to be ready for the next time.
4, the test of all parameters should be carried out at least 3 days after the glue is completely cured, at this time, the relevant values reach a stable value.
5. For more data and information about potting glue, please consult Shenzhen Yaoneng Technology Co., Ltd. for relevant advice and help.
VI. [Packaging and Storage]
1. This product is packed in 22kg/ group.
2, this product in the ventilated, dry cool, in the dark sealed storage, shelf life of 6 months.