370 UV moisture double curing triple conformal coating

I. [Product Features]

1. Single component UV resin, low odor, UV light and moisture curing, with fluorescent indicator, easy to detect

2, fast second dry insulating paint, strong adhesion, wear resistance, acid and alkali resistance, oil resistance, compact and bright surface

3, high and low temperature resistance, good chemical resistance, convenient operation, high production efficiency

Two, [scope of application]

YaoNeng 370 anti-coating is applicable to all kinds of assembled PCBA circuit boards to protect the circuit boards from various chemicals, moisture, salt spray corrosion, dust and high and low temperature and other adverse environmental impact, prolong the service life of the equipment and improve the safety and stability of the products.The cured film is compact and bright, with strong adhesion and good aesthetics.At the same time, it has excellent insulation, moistureproof, anti-leakage, shockproof, anti-fouling, dustproof, mildewproof, anti-salt fog, anti-corrosion, corona resistance, anti-oxidation and other characteristics, which can play a significant multi-prevention effect.Mainly used in: hybrid integrated circuit, automobile electronic control board, electronic and electrical circuit board, aviation instrument board, flexible printed circuit, microcomputer control board, semiconductor crystal circuit board, home appliance control system, etc.

IV. [Usage]

1. Clean and dry the circuit board.Before use, clean or clean the circuit board surface of dust, impurities, oil, and remove moisture and moisture.It is recommended to dry the board at 60℃ for 10 to 15 minutes. The circuit board can be taken out and coated with three-proof paint after natural cooling in the oven.

2. Covering and shielding.There are some areas and parts of the circuit board that are not allowed to be covered with triple paint, such as switches, sockets, connectors, radiators, etc.YaoNeng Company suggests that prior to construction can be used tape or the United States tape paste protection.

3, the use of technology.A, spraying process: spraying method in the construction of the preparation of the three anti-paint can be directly added to the spray gun can, the air pressure of the spray gun, spray nozzle and the flow of the paint can be adjusted, after sealing directly for spraying.When the consistency of the three paint is too large, it can be used with YaoNeng 120 type special thinner. After mixing evenly, it should be allowed to stand for 10 minutes until the bubbles are removed before construction. The ratio of the three paint and thinner should not exceed 1.5 times.B, brush coating process: according to the size of the product, choose the wool brush correctly, pour the glue into the container, and then use the brush to stick the appropriate glue to the circuit board for uniform construction, according to the required thickness of the number of brushing.C, dip coating process: dip coating parts immersed in the glue solution for 2-5 seconds, slowly lift the dip coating parts, tilt, until the excess glue natural flow off, dip coating parts flat on absorbent paper (small) or bracket (large), check the surface of the dip coating parts, the area is not painted brush paint.Shaded area or UV light does not fall, moisture can be cured, curing time needs more than 72 hours, UV three anti paint curing time and UV light intensity and paint film thickness is related, UV lamp power is greater, the faster the dry, the thinner the film dry faster.

4. Fix the problem.To repair the completed circuit board, just use the electric soldering iron to heat the coating in the area, and then repair and replace the relevant parts. After completion, clean and dry the surface of the board, and then brush the paint, UV lamp irradiation and curing can be completed.

5. For more data and information, please consult Shenzhen Yoneng Technology Co., Ltd. for relevant advice and help.

5. [Precautions]

1, three anti paint in use, the humidity of the construction site can not be greater than 85%, otherwise there will be a slightly white hygroscopic phenomenon.

2. Ventilation and personal protection should be strengthened in the production process, and keep away from fire and heat source.

3, handling should be handled lightly, the packaging cover should be sealed in time, open the independent packaging should be used up within 5 days.

4, the test of the parameters of emotion and energy should be carried out at least 72 hours after painting, when the relevant values reach the maximum and stable value.

5, three anti paint will generally have a smell, but the three anti paint is completely cured after no smell.

VI. [Packaging and Storage]

1. This product is packed in 1L and 5L iron drums.

2. This product is flammable, sealed in ventilated, dry, cool, dark place, shelf life of 6 months.